Chapter 1114

Builders Blog Post New Entry


view:  full / summary

Dennis Roberts' RV-7 Project N713DR

Posted by Dennis Roberts on October 16, 2011 at 8:30 AM Comments comments (0)

After 6 years of construction, my RV-7 project is now completed!    :lol:

Check out my builder's blog at www.drrv7.com

Features:  Lycoming IO 540 260 HP / Airflow Performance fuel injection system  / Hartzel constant speed prop / Dynon Skyview 10” PFD/EMS with synthetic vision / Mode S Transponder with Traffic displayed on the PFD / Garmin SL40 Com / Garmin GMA 240 Audio Panel / Prewired for Garmin 430W upgrade Nav/Com / Custom Leather Interior by Classic Aero Designs / Custom trimmed Aviator leather side panels and baggage compartment / Cabin and baggage area carpet / Custom colored Hooker Harnesses and Pads.

Made the 1st flight November 18th 2011

Kent Misegades' KZ VIII

Posted by EAA 1114 Webmaster on September 21, 2011 at 9:30 AM Comments comments (8)

If I had a clone and a large walkout basement full of tools like Jack Phillips does, I would build a KZ VIII.  A design from the prolific Swedish engineer Bjoern Andreasson (Buecker Bestmann and Jungman, Cynet, MFI-09, SAAB Sonnett sports car, etc.), it is said that the KZ VIII inspired Walter Extra to stop building Pitts and develop his early monoplane aerobatic ships.  Its line are sensuous, and I like working with wood.   Niels Nielsen and I have seen two of only three KZ VIIIs in the world at the great Danmarks Flymuseum in Stauning, Denmark.  The picture here is of a recent creation, a blue KZ VIII built and flown by former Danish Air Force Draken/F-16 pilot Hardy Vad.  The white and red one is an original, with an inline engine.





RV-12 SN 395 now flying as N124BX

Posted by JPBernoux on September 20, 2011 at 4:25 PM Comments comments (4)

Born in France, lives Raleigh, NC since 1987

Expected 1st Flight: Spring 2012

This is my daughter Anne, helper and ground tester:


Now you see how optimistic I was only 2  years ago: First flight took place 09/11/2013. It's all VANs fault, of course  :/


For updates see: http://vieilleburette.blogspot.com/

Michael Crowder's Sonex

Posted by Michael Crowder on September 20, 2011 at 9:40 AM Comments comments (5)

Below is a picture of my Sonex project.  The project took me 1000 hours and 5 years to complete.  The first flight was in October 2008 as a Tri-Gear configured Sonex.  In 2010, I converted it to a taildragger and I've been very happy with the conversion.  The airplane cruises at 140-150 mph burning 6.5 gph.


Things unique to my Sonex...I have a Jabiru 3300 120HP 6 port fuel injected engine, Electric Flaps, and all the bells and whistles you could want.


Upcoming Projects/Additions:  Wheel Pants, Wing Leading Edge Tape, Hangar Wing Covers, Custom Tug and Towbar. Flap to Fuselage Seals.


More pictures can be found at my webpage.... http://www.pbase.com/sonex293/sonex293


BCAC Stits SA-7D Skycoupe

Posted by EAA 1114 Webmaster on September 16, 2011 at 1:20 PM Comments comments (1)

Here is the first posting of an EAA1114 project.  The Bear Creek Aero Club, formed by EAA1114 members and headquartered at the Bear Creek Skunkworks (Terry Gardner's hangar at Eagles Landing, Pittsboro, NC), is completing its first project, a rare Stits SA-7D Skycoupe.   This airplane, designed by the famous Ray Stits, was one of the most popular homebuilts of the 1960s.   You'll find our main blog at this link.  General Aviation News published a brief article on our efforts on 9/1/2011, read it here.  Below is an image of a completed Skycoupe.  We plan to take ours to EAA AirVenture Oshkosh 2012 and other area events.  Anyone interested in helping us complete the Skycoupe, contact me, Kent Misegades.



Rss_feed

Hints for Homebilders videos at eaa.org